Drinking bowls

Drinking Вowls with a Tongue Valve

Drinking bowls with a tongue valve model. The valve is actuated through pressure on the tongue and the water flows into the drinking bowl. Recommend mainly for cattle with horns or for easy to care for animals with a nose ring. Cleaning the bowl regularly is important as dirt particles and feeding leftovers are likely to adhere to the back of the activation tongue. Drinking bowls with a tube valve in order to reduce maintenance work to a minimum.

SMD 8

Bu görsel boş bir alt niteliğe sahip; dosya adı Döküm-suluk-Mod.-8-1024x843.jpg
  • Cast iron, with white enameled interior with tounge valve
  • High water flow 35 L/min at 5 bar.
  • Ideal for Water Tanks.
  • Large drinking bowl made of cast iron, with white enamelled interior
  • High water flow: up to 6 l/min at low pressure.
  • Simple water flow regulation possibility from outside.
  • Water flow can be completely shut off by means of a stirrup behind the tongue.
  • ¾” male connection from all sides (360°)
  • Robust construction and solid valve as well as to the quick water
    flow even at low water pressure drinking bowl Model 8 can very well be used for installation on water tanks.

SAQ 180 WT

Bu görsel boş bir alt niteliğe sahip; dosya adı Plastik-suluk-Mod.-180P-889x1024.jpg
  • Water Tank Drinker Model 180P 
  • RECOMMENDED FOR: Cattle, horses.
  • Quick water drainage and direct attachment for water tanks.
  • Free and high water flow enables quick drinking.
  • Large drinking bowl made of high-density UV-resistant AQUATHAN plastic for direct attachment to water tanks, with flange.
  • Free running valve tongue
  • Robust low pressure brass valve.
  • High water flow enables quick drinking even at low water pressure
  • Flange sealing included

SMD 65

Bu görsel boş bir alt niteliğe sahip; dosya adı Döküm-suluk-Mod-65-H04-K.jpg
  •  Recommended for cattle, horses.
  • ½” connection from top and bottom
  • Drinking bowls made of cast iron, plastic-coated with broad tongue ½” valve
  • Calm water flow through tube valve no water spillage.Drinking bowl H04-K, plastic-coated.
  • Bowl made of cast iron, plastic-coated with broad tongue valve
  • ½” female connection from top and bottom
  • Calm water flow through tube valve, no water spillage
  • with 4-hole-fixation and 2 fixing brackets for fixation on 1½” – 2″ pipes necessary.

Drinking Вowls with a Tube Valve

Drinking bowls with a tube valve are used for almost all animals, as animals can reach the bowl very easily.

The animal´s bridge of the nose activates the valve easily. Even side activation is possible and uncomplicated. The water flows into the drinking bowl after pressing the tube valve and the animal can now drink as much water as it needs.

If the drinking bowl is equipped with a regulation screw, the water flow can be continuously adjusted from outside. Even sensitive animals will accept this tube valve system!

Maintenance of the valve spring can easily be replaced by unscrewing the lower part of the valve and all relevant parts are accessible. On tube valves which are equipped with a regulation screw, the water supply of the drinker can be turned off for changing the valve. The water supply line has not to be completely cut off, still giving the rest of the animals the chance to drink.

SMD 66

Bu görsel boş bir alt niteliğe sahip; dosya adı Dokum-suluk-Mod-66.jpg
  • Recommended for cattle, horses.
  • ½” from top and bottom
  • Bowl made of cast iron, plastic-coated with brass tube valve
  • Calm water flow through tube valve, no water spillage.
  • Drinking bowls IDEAL-K, plastic-coated.
  • Bowl made of cast iron, plastic-coated  smoothly running brass tube valve.
  • ½” female connection from top and bottom  calm water flow through tube valve, no water spillage
  • with 4-hole-fixation and 2 fixing
    brackets for fixation on 1½” – 2″ pipes necessary.

SMD 20

Bu görsel boş bir alt niteliğe sahip; dosya adı emaye-suluk-Mod.-20-MS½.jpg
  • Cast iron, completely enameled bowl with brass valve.
  • Smoothly running brass tube valve with ½” male connection from the top.
  • Calm water flow through tube valve, no water spillage
  • Water flow regulation by enlarging the nozzle boring
  • RECOMMENDED FOR: Cattle, horses.

SMD 60

Bu görsel boş bir alt niteliğe sahip; dosya adı Emaye-suluk-Mod.-60-1024x1014.jpg
  • Recommended for cattle, horses.
  • Cast iron, completely enameled with ½ brass valve.
  • Bowl made of cast iron, completely enamelled
  • Smoothly running brass tube valve.
  • ½” female connection from top and bottom.
  • Calm water flow through tube valve, no water spillage
  • With 4-hole-fixation.

SMD 19R

Bu görsel boş bir alt niteliğe sahip; dosya adı Emaye-suluk-Mod.-19R-1024x860.jpg
  • Ideal to use between two boxes with double brass tube valve
  • Cast iron bowl in complete enameled finish
  • High water flow up to 20 L/min adjustable from outside with a regulation screw.
  • Drinking bowl with double brass tube valve
  • Flat and easy-to-clean cast iron bowl in complete enamel finish
  • Ideal to be fixed into a separation wall between two boxes.
  • High water flow up to 20 l/min
  • Water flow continuously adjustable from outside by means of a regulation screw.
  • Double brass tube valve with ½” or ¾” female connection from top and bottom.
  • Calm water flow through tube valves
  • 6-hole-fixation.

SMD 370

Bu görsel boş bir alt niteliğe sahip; dosya adı Emaye-suluk-Mod.-370-MS½-771x1024.jpg
  • Cast iron enameled drinking bowls MODEL 370 ½” brass valve top- max 6 bar top
  • Bowl made of cast iron, completely enameled bowl with brass valve
  • Always fresh and clean smoothly running water with regulation screw max 6 bar.
  • Drinking Bowl with Drink Inducer
    Model 370 with ½” brass valve.
  • Bowl made of cast iron, completely enamelled, easy to clean
  • Always fresh and clean water – no risk of dirty water as in the case of drinking bowls with float valve
  • Smoothly running tube valve even at high water pressure of max. 6 bar.
  • Valve can be operated from all sides.
  • With enticement basin behind the tube valve, which encourages the animals to drink on their own.
  • Calm water flow through tube valve
  • ½” female connection from the top
  • Water flow continuously adjustable from outside by means of a regulation screw.
  • Special back side design enables easy fixation into 90° corners, on the wall or on pipes.

SMD 375

Bu görsel boş bir alt niteliğe sahip; dosya adı Emaye-suluk-Mod.-375-VA¾-1024x1005.jpg
  • ¾ “ stainless steel valve –max 6 bar all sides
  • Bowl made of cast iron, completely enameled with stainless steel valve
  • Always fresh and clean water pressure of max 6 bar with regulation screw.
  • Bowl made of cast iron, completely enamelled, easy to clean
  • Always fresh and clean water – no risk of dirty water as in the case of drinking bowls with float valve.
  • Smoothly running tube valve even at high water pressure of max. 6 bar.
  • Valve can be operated from all sides
  • With enticement basin behind the tube valve, which encourages the animals to drink on their own.
  • Calm water flow through tube valve
  • ¾” female connection from from top and bottom: suited for installation into water circuits!
  • Water flow continuously adjustable from outside by means of a regulation screw.
  • Special back side design enables easy fixation into 90° corners, on the wall or on pipes.

Heated drinkers

SMD 46 R/H

Bireysel hayvan Sulukları
  • H Brass ½ or Stainless Steel ¾ VALVE HEATED Cast iron, completely enameled that water not freeze with bowl cover.
  • Water not freeze down to -15C consist of 2 bowls and with heating valve -35
  • Water flow continuously adjustable water flow up to 12 L/min.
  • Heated drinking bowl with smoothly running tube valve for wall and pipe mounting.
  • Frost-protected down to approx. -15°C. Remaining water in the bowl
    will not freeze.
  • With subsequent installation of valve heating (24 V, 5 W, Order Ref. 1405), supplied on demand, is frost-protected down to -35°C!
  • Drinking bowl made of cast iron, completely enamelled
  • One drinker is sufficient for 15 – 20 animals
  • Easy access to installed heating element, which is installed out of reach for the animals between the two bowl parts
  • Smoothly running tube valve in ½” brass or in ¾” stainless steel with female connection from top and male connection from bottom
  • Water flow continuously adjustable from outside by means of a regulation screw.
  • Capacity of the heating element 80 W/24 V – few power consumption.
  • Installation on the wall or on 2″ – 3″ pipes
  • For power supply Transformer 230/24 V is necessary
    (for correct choice of transformer see page)
  • To ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m. a 24 V, 30 W, 3 mhas to be used. The heating cable should be wrapped around the pipe and connected to the heating element of the drinker in parallel to the power supply cable, coming from the transformer.
  • If the heating cable is installed on plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution the water pipe has to be wrapped with an aluminium adhesive tape and insulated.

SMD 25 R/H

Bu görsel boş bir alt niteliğe sahip; dosya adı emaye-suluk-Mod.-25R-H-MS½-672x1024.jpg
  • H Brass ½ or Stainless Steel ¾ VALVE Cast iron, completely enameled with valve
  • With valve heating element (24 V, 5 W) the tube valve is frost-protected down to approx. -20C Heating switch is on at 5 C and off at 12 C and heating unit transformer is necessary to use.
  • Water flow continuously adjustable water flow up to 12 L/min.
  • Large drinking bowl made of cast iron, completely enamelled.
  • Smoothly running tube valve in ½” brass or ¾” stainless steel with female connection from top and bottom.
  • Calm water flow through tube valve
  • Water flow continuously adjustable from outside by means of a regulation screw, water flow up to 12 l/min With 6-hole-fixation.

SMD 340 / H

Bu görsel boş bir alt niteliğe sahip; dosya adı Döküm-suluk-Mod.-340-1024x824.jpg
  • Large bowl made of cast iron, black enamelled
  • 5 bars ½ Float valve allowing quick water.
  • Flow frost protected to -20 with HE.
  • Float valve allowing quick water flow
  • Removable cover in stainless steel
  • No sharp edges, no risk of injury!
  • Constant water level – simple adjustment
  • Mod. 340: ½” male connection, from right hand side.

SIBIR 41 A/ H 6 bar

Bu görsel boş bir alt niteliğe sahip; dosya adı ısıtıcılı-emaye-suluk-Mod.-41A-1024x942.jpg
  • Cast iron with White enamele in side with tounge valve
  • Frost resistant heating element 80 w to -25 and 180w to -35 C or Termo tube.
  • Heated drinking bowl made of cast iron with white enamel finish in the interior
  • Frost-resistant down to -25°C
  • One drinker is sufficient for 15 – 20 animals
  • Smoothly running tongue valve
  • Back-stroke-free valve with high water flow up to 15 l/min
  • Water quantity can be simply adjusted to existing water pressure by exchanging nozzles (included in scope of delivery)
  • For water pressure of max. 6 bar Valve is designed to close slowly even at higher water pressure thus preventing strokes in the water line.
  • Reliable functioning even when ferruginous or aggressive water is given!
  • Capacity of the heating element: 80 W/24 V or 180 W/24 V, according to the version.
  • For increased frost protection up to -35°C available with 180 W heating element (Order Ref. 041). Heating cable around feed pipe is then recommended (2 m or 3 m)

SIBIR 43 A/ H 5 bar

Bu görsel boş bir alt niteliğe sahip; dosya adı Emaye-suluk-Mod.-43A-1024x854.jpg
  • Cast iron with White enameled in side with float valve
  • Frost resistant heating element with 80 to 20 and 180W to -30 C or Termo tube.
  • Heated drinking bowl with float valve
  • Made of cast iron, with white enamelled interior
  • Frost-resistant down to -20°C
  • One drinker is sufficient for 15 – 20 animals
  • Due to float valve, water pressure must not exceed 5 bar!
  • Easy adjustable water level
  • According to existing water pressure, water flow up to 5 l/min
  • This unit is ideal for use with calves, horses, sheep, goats, deer and other small animals with sensitive noses!
  • Capacity of the heating element: 80 W/24 V or 180 W/24 V, according to the version
  • For increased frost protection up to -30°C available with 180 W heating
    element (Order Ref. 1043). Heating cable 24 V around feed pipe is then recommended (2 m or 3 m, )

Aquatan plastic drinkers

SAQ 10 P

Bu görsel boş bir alt niteliğe sahip; dosya adı Aqua-plastik-suluk-Mod.-10P.jpg
  • Aquatan plastic extremely flexible, impacts and shock-resistant with brass tube valve.
  • Bowl made of top quality AQUATHAN plastic
  • Extremely flexible, flexes on impacts, shock-resistant
  • No sharp edges, no risk of injury
  • Smoothly running brass tube valve with ½” male connection from the top
  • Calm water flow through tube valve, with enticement basin
  • Water flow regulation by enlarging the nozzle boring.

SAQ 12 P

Bu görsel boş bir alt niteliğe sahip; dosya adı Aqua-plastik-suluk-Mod.-12P-VA¾.jpg
  • Aquatan plastic extremely flexible, impacts and shock-resistant with brass tube valve.
  • Heated Drinking Bowl for Calves and Horses
  • Model 12P-HK with ½” brass valve. Frost protection of the bowl, of the valve and of the feed pipe is done by a 3 m long frost protection heating cable 24 V, 30 W, included in scope of delivery.
  • The frost protection heating cable can be found in windings beneath the bowl in a flexible rubber body. An aluminium foil fixed at the bottom of the bowl provides a constant heat distribution.
  • Frost protection for the valve itself is guaranteed by three tightly fitted windings above the valve.
  • With the rest of the heating cable of approx. 2 m the feed pipe is maintained frost-free in addition. It should be insulated and protected against bites.
  • Frost protection down to approx. -20°C. Remaining water in the bowl will not freeze!
  • For power supply a SUEVIA transformer 230/24 V is necessary (versions from 50 W to 400 W available)
  • Bowl made of top quality AQUATHAN plastic
  • Very elastic, flexes on impacts, shock-resistant
  • No sharp edges, no risk of injury
  • Smoothly running brass tube valve (½”)
  • ½” female connection from top and bottom
  • Water flow continuously adjustable from outside by means of a regulation screw.
  • Calm water flow through the tube valve

SAQ 130 P 5 bar / P-N 1 bar

Bu görsel boş bir alt niteliğe sahip; dosya adı Plastik-suluk-Mod.-130P.jpg
  • UV-resistant AQUATHAN plastic with float valve
  • Quick drainage and water flow with constant water level.
  • Model P-N 1 Bar low pressure can be fixed to water tanks.
  • Large bowl made of UV-resistant AQUATHAN plastic
  • Float valve allowing quick water flow
  • With plug for quick drainage
  • Removable cover in stainless steel
  • No sharp edges, no risk of injury!
  • Constant water level – simple adjustment
  • ½” male connection from right or left hand side.

.

Menu
Call Now Button